B3S EziJac

知识来源:专业液压扳手生产厂-江苏海力机械制造有限公司
访问次数:4896次
发布时间:2013-02-04

The B3 Modular EziJac Stud Tensioner provides accurate and versatile tensioning of bolts and studs
whilst being fast, simple and safe to use。 The EziJac utelises a loadcell with an adapter kit so as the
one tool can be used for a range of stud size whilst only having to change the adapter kit。
The EziJac uses hydraulic pressure to tension the bolt to the exact load required。 Once the application
has been tensioned, the nut is wound down the thread to retain the load。 The EziJac is then de-pressurised,
released and ready to use again。

Any number of EziJac can be interlinked to provide even amounts of simultaneous tension over multiple
studs or bolts as required。

Produced from high strength alloy steel, EziJac Stud Tensioners are made in standard configurations。
They can also be made to suit the requirements of a specific application。

---

Although smaller and lighter than many competitive types, EziJac Stud Tensioners are capable of high
application forces。 The higher forces generated by EziJac devices permit their use with bolts of very high
tensile strength, for example, in bolting of highly stresses assemblies or those prone to destructive vibration。
A3 EziJac can come with spring return or manual return feature。 when purchased with the spring return
feature there is very little physical effort required to do the job at hand。
EziJac are designed for durability and manufactured with ease of servicing, with readily available spare parts。
The EziJac provides the following advantages:

• Reduces maintenance down time。
• Improves safety on the job by eliminating hammer tightening。
  
• Gives reliable and precise tensioning
  
• Is user friendly - fast to fit and remove。
• Requires little physical effort。
• Is ideal for confined spaces or difficult locations。
• Multiple tensioning for leak-free flange makeup。

As well as the standard range of A3 EziJac specials EziJac can be designed to suit your requirements
such as the M460 EziJac shown below designed for a forging press。

Applications include:

• Mining and Quarrying
  
• Marine
  
• Power Generation
  
• Agricultural
  
• Structural
  
• Heavy Equipment
  in general industry
  
• Chemical Plants
  

---

The above drawings show the EziJac being pressurised therefor stretching the stud then the nut rotator being wound down
with the nut and tensioning the stud。 the pressure is then released and the spring packs where provide return the tool to the
home position and the tool is the ready for service。
B3S Hydraulic Tensioners Specifications

本文链接:http://www.hynew.com.cn/yybs_387.html
转载请注明:江苏海力液压扳手 http://www.hynew.com.cn

上一篇:A5 Two-Stage EziJac
下一编:B3 Modular EziJac

液压扳手相关知识

■追风逐日正当时  十二五计划大纲解读 ■核电十问：核电能否安全 ■水电开展需镇定：三峡环保难题的蝴蝶效应 ■中国可再生能源学会2011学术年会：陆优势电有序开展 海优势电探究起步 ■中国风力发电当时存在难题  中国风力发电陈述（二） ■海优势电：估计2013年装机达500万千瓦

液压扳手相关产品(请点击产品名称查看详细资料)

■中空液压扳手 驱动式液压扳手 液压扭力扳手 电动定扭矩扳手 ■螺栓拉伸器 螺母破切器 螺栓快速修复器 加力扳手